Please note that this website contains affiliate links. This means that if you click on a link and make a purchase, I may receive a small commission at no additional cost to you. This helps support the creation of free content on this site. Thank you for your support!

Create Your Own Layered Bear Forest Scene

Feb 18, 2022by Viktoria Volk

 

 

Bear forest 3D shadow box project

 

Complete a pretty 3D scene of a bear in a forest in 18 steps.

Get the full design here. 

Difficulty Level: Medium

Size: Must be at least 8" x 10" (20cm x 25cm)

Tools & Materials

Step 1: Cut layer 1 out of dark brown cardstock and layer 2 out of bright green cardstock. The colors are only suggestions!Step 1 Cut layer 1 out of dark brown cardstock and 2 out of bright green cardstock
Step 2:

Stick foam strips to the back of layer 1 and cover the foam pieces with more adhesive.

Step 2 Stick foam strips to the back of layer 1 and cover the foam pieces with more adhesive.
 Step 3: Stick layer 1 on top of layer 2.
Step 3 Stick layer 1 on top of layer 2
Step 4: Cut layer 3 out of light green cardstock and set aside. Step 4 Cut layer 3 out of light green cardstock and set aside
Step 5: Stick foam strips to the back of layer 2 and cover the foam pieces with more adhesive.
Step 5 Stick foam strips to the back of layer 2 and cover the foam pieces with more adhesive.
Step 6: Place the back of layer 2 to the back of layer 3.Step 6 Place the back of layer 2 to the back of layer 3.
Step 7: Cut layer 4 out of bright green cardstock and set aside.Step 7 Cut layer 4 out of bright green cardstock and set aside.
Step 8: Stick foam strips to the back of layer 3 and cover the foam pieces with more adhesive.Step 8 Stick foam strips to the back of layer 3 and cover the foam pieces with more adhesive.
Step 9: Stick the back of layer 3 to the front of layer 4.Step 9 Stick the back of layer 3 to the front of layer 4.
Step 10: Cut layer 5 out of ivory cardstock and set aside.Step 10 Cut layer 5 out of ivory cardstock and set aside.
Step 11: Stick foam strips to the back of layer 4 and cover the foam pieces with more adhesive.
Step 11 Stick foam strips to the back of layer 4 and cover the foam pieces with more adhesive.
Step 12: Stick the front of layer 5 to the back of layer 4.Step 12 Stick the front of layer 5 to the back of layer 4.
Step 13: Cut layer 6 out of blue cardstock.Step 13 Cut layer 6 out of blue cardstock.
Step 14: Stick foam strips to the back of layer 5 and cover the foam pieces with more adhesive.Step 14 Stick foam strips to the back of layer 5 and cover the foam pieces with more adhesive.
Step 15: Stick the front of layer 6 to the back of layer 5.Step 15 Stick the front of layer 6 to the back of layer 5.
Step 16: Cut layer 7 out of white cardstock.Step 16 Cut layer 7 out of white cardstock.
Step 17: Stick foam strips to the back of layer 6 and cover the foam pieces with more adhesive.
Step 17 Stick foam strips to the back of layer 6 and cover the foam pieces with more adhesive.
Step 18: Step 18 Stick the back of layer 6 to layer 7. All done!Step 18 Stick the back of layer 6 to layer 7.
Bear in a Forest 3D layered cardstcok scene
Get the full design here. 
Back to The Shop

Leave a comment

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Back to TUTORIALS