Please note that this website contains affiliate links. This means that if you click on a link and make a purchase, I may receive a small commission at no additional cost to you. This helps support the creation of free content on this site. Thank you for your support!

Create Your Own Layered Shiba Inu Scene

Feb 17, 2022by Viktoria Volk

 

 

Shiba Inu Dog in Bamboo Forest 3D Shadow Box Frame

 

Complete a Cute Shiba Inu 3D scene in a Bamboo Forest in 20 steps.

Get the full design here. 

Difficulty Level: Medium

Size: Must be at least 8" x 8" (20cm x 20cm)

Tools & Materials

Step 1: Cut layer 1 out of dark brown* cardstock. *The colors are only suggestions!Shiba Inu Layer 1
Step 2: Check that your first layer fits well into the frame before cutting the rest.Shiba Inu Layer 1 Frame Fit Check
 Step 3: Cut layer 2 out of green* vinyl.Shiba Inu Leaves Vinyl Decal
Step 4: Apply the vinyl on top of layer 1.                                                          Shiba Inu Leaves Decal Transfer
Step 5: Cut layer 3 out of light brown cardstock.Shiba Inu Layer 3 Paw
Step 6: Stick foam strips to the back of layer 3, and apply adhesive on top of the foam as well.Shiba Inu Paw Foam Layer 3
Step 7: Stick layer 3 to layer 1&2.Shiba Inu Stick Layer 3
Step 8: Cut layer 4 out of forest green cardstock.Shiba Inu Layer 4 Forest Paw
Step 9: Stick foam strips to the back of layer 4. Apply glue on top of the foam as well.Shiba Inu Layer 4 Foam
Step 10: Stick layer 4 on top of layer 3.Shiba Inu Layer 4 Layering
Step 11: Cut layer 5 out of light green cardstock.Shiba Inu Layer 5
Step 12: Stick foam strips on the back of layer 5. Apply glue on top of the foam strips as well.Shiba Inu Layer 5 Foam
Step 13: Stick layer 5 on top of layer 4.Shiba Inu Layer 5 Layer
Step 14: Cut layer 6 out of green cardstock.Shiba Inu Layer 6
Step 15: Stick foam strips to the back of layer 6. Apply glue on top of the foam as well.Shiba Inu Layer 6 Foam
Step 16: Stick layer 6 on top of layer 5.Shiba Inu Layer 6 Layering
Step 17: Cut layer 7 out of white cardstock.Shiba Inu Layer 7
Step 18: Stick foam strips to the back of layer 7. Apply glue on top of the foam as well.Shiba Inu Layer 7 Foam
Step 19: Stick layer 7 on top of layer 6. All done! Shiba Inu Layer 7 Layering
Shiba Inu Shadow Box Frame Gift
Get the full design here. 
Back to The Shop

Leave a comment

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Back to TUTORIALS